Reset Of The Controller - M&C CG Series Instruction Manual

19.4

RESET OF THE CONTROLLER

A reset out of the temperature lock happens with connected mains:
•
operating simultaneously the keys
A reset only happens in case the actual temperature deviates by < ±10 °C [±18 °F] from the set temper-
ature.
Another method for a reset that functions without problem is to cut the mains voltage for a short moment
(remove the mains plug).
Watch carefully the control characteristic after reset. This simplifies the di-
agnosis of errors when a failure happens again!
N O T E !
30

EXIT and
CG-2 | 1.04.00 www.mc-techgroup.com