Mitsubishi Electric PCA Series Service Manual page 10

Split-type, heat pump air conditioners, ceiling suspended r32/r410a indoor unit
Hide thumbs Also See for PCA Series:
Table of Contents

Advertisement

Display
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
2 3 4 5 6 7 @
6
7
8
Room
9
0
Set temp.
Cool
1
1
Mode
!
▌1 Operation mode
▌2 Preset temperature
▌3 Clock
▌4 Fan speed
▌5 Button function guide
Functions of the corresponding buttons appear here.
▌6
Appears when the ON/OFF operation is centrally controlled.
▌7
Appears when the operation mode is centrally controlled.
▌8
Appears when the preset temperature is centrally controlled.
▌9
▌0
▌1 Room temperature
▌2
Appears when the buttons are locked.
▌3
Appears when the On/Off timer, Night setback, or Auto-off timer function
is enabled.
appears when the timer is disabled by the centralized control system.
OCH725
8
Fri
Temp.
Fan
2
5
<Basic mode>
$
3
#
9
Cool
)
1
4
Mode
▌4
Appears when the Weekly timer is enabled.
▌5
Appears while the units are operated in the energy-save mode. (Will not
appear on some models of indoor units)
▌6
Appears while the outdoor units are operated in the silent mode.
▌7
Appears when the built-in thermistor on the remote controller is activated
to monitor the room temperature (1).
appears when the thermistor on the indoor unit is activated to moni-
tor the room temperature.
▌8
Indicates the vane setting.
▌9
Indicates the louver setting.
▌)
Indicates the ventilation setting.
▌!
Appears when the preset temperature range is restricted.
▌@
Appears when an energy-saving operation is performed using a "3D i-
See sensor" function.
▌# Centrally controlled
Appears for a certain period of time when a centrally-controlled item is
operated.
▌$ Preliminary error display
An error code appears during the preliminary error.
Most settings (except ON/OFF, mode, fan speed, temperature) can be
made from the Main menu.
10
2
Fri
Set temp.
Temp.
Fan
5
3
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pca-m71haPca-m71ha-et

Table of Contents