New Age Performance Plus 2.0 Series Manual page 23

Installing Worktop Side Support Tray
Parts Needed.
4 X Lock Nut 4 X Hex Bolt
(1/4")
(1/4" x 5/8")
8 X Washer
6 x Wood Screws
(1/4")
2
Align bracket holes with front or back
of locker and insert hex bolts through
holes.
X4
4
Lower worktop into position and attach
using (6) - #8 x 5/8" screws.
2 X Tray
#8 x 5/8
1
Open locker doors and locate upper
holes on side panels.
3
Repeat Steps 1-2 for 2nd side tray.
Install worktop wall supports in to the
5
wall studs below the worktop using 2.5"
lag screws with 3/16" pilot holes.
23