New Age Performance Plus 2.0 Series Manual page 22

Installing Worktop
Side Support Bracket
Parts Needed.
2 X Washer
(1/4")
2 Align bracket holes with locker holes
and insert hex bolts through holes.
Use #8 x 5/8" wood screws and washers,
4
provided in the locker packaging.
X3
22
1
2 X Hex Bolt
(1/4" x 5/8")
2 x Wood Screw
#8 x 5/8
Note: Support Bracket included with Lockers
A support bracket is to be used if the worktop is
added to the set without a secondary supporting
base/tool cabinet.
Open locker doors and locate holes on side
panels.
3
Tighten nuts & bolts.
X2