Table of Contents
Advertisement
Create new
alarm objects
New
To register new alarm objects in the system, click [New]. Enter the
required information and click [Add].
1
2
3
4
5
6
7
1.
ID Code: all alarms must have a 6 to 8-digit code or a telep-
hone number. The phone number always should be preceded
by the international prefix, e.g. 084477932 should be entered
as +4484477932.
2.
ID-Info, Address: this object information will be displayed in the
e-mail or the SMS
3.
Number of days: interval in days between the test alarms. Note!
"Number of days" should be identical to the test alarm interval
programmed in the lift telephone.
4.
Test Alarm Only: if you are using lift telephones other than
SafeLine for the test alarm transmission to SLCC.
telephone should be able sending the P100 code as identifica-
tion. SLCC can only receive test alarms. for identification. Only
testlarms can be received.
5.
Alarm Popup: The alarm Window will Pop up every time an
alarm has been received.
6.
Technical Alarms: all technical alarms, e.g. test alarm, battery
alarm, monitoring alarm and SMS alarm, will be sent to the
e-mail address(es) listed in this field. You can enter multiple
e-mail addresses or SMS numbers. The addresses and numbers
should be separated with "," (comma) or ";" (semicolon).
7.
Emergency Calls: The e-mail addresses and SMS numbers from
this list will receive a message whenever a voice call from the lift
telephone is connected to the emergency operator.
"Receipt on voice call" option must be activated (enabled) in
the lift telephone.
16
Note!
The lift
Note!
The
SLCC v.4.01 EN
Advertisement
Table of Contents
