Configuring the SafeLine telephone Configuration The SLCC menu Create new alarm objects Alarm window Alarm status Voice call Sending an SMS Example of an e-mail transmitted by SLCC Example of an SMS transmitted by SLCC Declaration of Conformity SLCC v.4.01 EN...
Requirements for SLCC SLCC with PSTN modem: Operating System: Windows XP CPU: 1.0 GHz or faster RAM: 500 Mb or more Hard Disk: At least 100 Mb of free disk space Resolution: 1024x768 or higher Serial ports: 1 or USB to serial adapter Moreover, an Internet connection is required to enable the e-mail transmission.
If it is to be used red to be used for its specifi ed It is extremely important that for any other purpose, SafeLine purpose only. If it is to be used these installation instructions It is extremely important that must be contacted in advance.
Component list *PCABLE-USB Handset Phone line IN 230 VAC The default SafeLine Call Centre kit includes: Options: Modem GSM modem Modular cable 5 m. RJ11 Serial cable Telephone Power cord SLCC v.4.01 EN...
230 VAC SLCC SLCC can receive test alarms, failure alarms and battery alarms as well as emergency calls. To this end, one serial port must remain free (i.e. must not be used). If no serial ports are available on your computer, we can supply a USB to serial adapter.
Installing the Step 1 Software installation software on the Go to the SLCC product page at safeline-group. SLCC com.Download the Setup SLCC file from the product first computer files tab. Open the file and follow the on-screen instructions. Step 2 Creating a new operator 1. Start SLCC.
Page 8
Step 3 Select database If SLCC does not find a database in the installation folder, a new window will be opened. In this window, you must specify whether you want to create a new database or change the path to the database.
Page 9
• Select the desired COM port. • [Answer after 2 rings]: specify how many times the phone should ring (between 1 and 16) before SLCC answers the call. • [CPC Protocol]: check this box if the lift telephone uses the...
Page 10
[Mail Header]: in this field, you can enter additional information, which will be displayed in the header of the SLCC alarm e-mail. [Send test mail]: send a test alarm to test the e-mail function. The “Example e-mail” chapter includes an example of an e-mail transmitted by SLCC.
Page 11
The alarm however will not be deleted from the database! [Automatic refresh]: this box only should be checked if the computer is not directly connected to one of the SLCC modems. The [Automatic refresh] option will update the alarm list from the database with the specified interval.
Follow steps 1-7 from the previous chapter. In step 3 “Choose database”, check the [Change path to database] option. the software onto other computers (only if the database is located on a server) Select the folder where the database is located. SLCC v.4.01 EN...
“Software installation” chapter for more information. Sending a test SMS Send a test SMS to check the SMS function. Refer to the “Sending an SMS” chapter for more information. If a GSM modem is connected and enabled in settings tab communication. SLCC v.4.01 EN...
• LMS number: LMS by CPC protocol only 'Battery failure' is supported. If you are using telephones from other manufacturers for the alarm transmission to SLCC, they should be programmed in the same way. Refer to the manual of the manufacturer concerned. SLCC v.4.01 EN...
The SLCC menu Create new alarm objects Save View alarm About SLCC Open object Print Update Create new alarm object Open alarm object Save Print Print setup Exit Settings Change operator Edit alarm message file Export to excel System information...
SafeLine for the test alarm transmission to SLCC. The lift telephone should be able sending the P100 code as identifica- tion. SLCC can only receive test alarms. for identification. Only testlarms can be received. Alarm Popup: The alarm Window will Pop up every time an alarm has been received.
Page 17
GSM modem status PSTN modem status Status field Displays the current status of the modems and the communication of SLCC with the installed hardware. To obtain the “OK” status, both the hardware and the software must be correctly installed. SLCC v.4.01 EN...
Alarm window All alarms received by SLCC can be viewed in an alarm window (see chapter “Alarm settings”). Every alarm received by SLCC includes the following information: Source: how the alarm was transmitted ID-Code: P100-code/CPC or telephone number ID-Info: address information, object name...
Green: the yellow alarm was reported “finished”. A second time stamp and the operator ID are added to the alarm information. Blue: reception of a test alarm on schedule; this alarm does not need to be acknowledged. SLCC v.4.01 EN...
Pick up the handset to answer the emergency call. Time left: Time left on the emergency Silent: Silent alarm. call. Ignore: Ignore the emergency call. Status: Info. Pick up the handset to answer the emergency call. 1 2 3 4 5 6 7 8 9 *COMPHONE SLCC v.4.01 EN...
If the option “Send SMS” is greyed out, the GSM is not properly +4470123456. functioning or there is no communication with SLCC. In this case, you must check that: • The “GSM enabled” box is checked •...
Example of an e-mail transmitted by SLCC Example of an SMS transmitted by From: +467xxxxxxxx SLCC SLCC ALARM Type: Battery Failure ID Info: SL6 Adress: Antennvägen Battery Check Failed SLCC v.4.01 EN...
EN 62368–1:2014/AC:2015 LVD: Information Technology Equipment EN 50581:2012 RoHS: Technical doc. for assessment of restriction of RoHS. Tyresö, 2017-04-07 Lars Gustafsson, Technical Manager, R&D , SafeLine Group Antennvägen 10, 13548 Tyresö, Sweden +46 (0)8-447 79 32, www.safeline-group.com SLCC v.4.01 EN...
Page 24
Support: +32 (0)4 85 89 08 95 SafeLine Deutschland GmbH Kurzgewannstraße 3 · D-68526 Ladenburg · Germany Tel.: +49 (0) 6203 840 60 03 · sld@safeline.eu SafeLine Group UK Unit 47 · Acorn Industrial Park · Crayford · Kent · DA1 4AL · United Kingdom Tel.: +44 (0) 1322 52 13 96 ·...