Boss Modulation MD-200 Owner's Manual page 12

Overall Settings (Menu)
Menu Parameter List
About the mark
MEMORY MEMORY
5 Can be set and saved for each memory by the "Saving to Memory" (p.
10) operation. If you do not perform this operation, the settings are lost
when you switch memories.
5 Can be set and saved for each memory if the preference (SWP/MEP/C1P/
C2P/EPP) is set to MEM (MEMORY). To save, refer to "Saving to Memory"
(p. 10).
If set to SYS (SYSTEM), the settings common to the unit are used. Function
settings are saved automatically.
Parameter Explanation
oFF:
MEMORY MEMORY the memory.
tHd
(TEMPO HOLD)
on:
previous memory.
12
Operates using the tempo/rate of
Operates using the tempo/rate of the
Parameter Explanation
Specify the functions of the [ON/OFF]
switch, [MEMORY/TAP] switch, and
MEMORY MEMORY
SWF
footswitches connected to the CTL 1, 2/
(ON/OFF SWITCH
EXP jack.
FUNCTION)
* The functions that can be assigned differ
depending on the switch.
oFF:
MEMORY MEMORY
SW
(ON/OFF SWITCH)
MFC
(MEMORY SWITCH MoM
FUNCTION)
you hold down the switch.
MAn
M-1
M-2
MEMORY MEMORY
C1F
M-3
(CTL1 FUNCTION)
M-4
MUP
number according to the MEMORY
EXTENT setting.
Mdn
MEMORY MEMORY
C2F
memory number according to the
(CTL2 FUNCTION)
MEMORY EXTENT setting.
tAP
No operation.
:
Turns the effect on/off.
:
The effect is on only while
(MOMENT)
:
Selects manual.
(MANUAL)
: Selects memory 1.
(MEMORY 1)
: Selects memory 2
(MEMORY 2)
:
Selects memory 3.
(MEMORY 3)
:
Selects memory 4.
(MEMORY 4)
: Increments the memory
(MEMORY UP)
:
Decrements the
(MEMORY DOWN)
: Operates as tap tempo.
(TAP TEMPO)