English - Philips HI845/02 User Manual

ENGLISH

6
General description
A
Shot-of-steam button
B
Steam control
C
Spray button
D
Temperature pilot light
E
Steam trigger
F
Temperature dial
G
Soft-touch handgrip
H
Connecting cord/supply hose
I
Spray nozzle
J
Internal reservoir
K
Calc-clean button
L
Anti-calc cassette
M
Filling opening
N
Cassette release button
O
Suspension hook
P
Mains cord
Q
Water tank
R
Rubber mat
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗ Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
◗ Only connect the appliance to an earthed wall socket.
◗ Do not use the appliance if the plug, the cord, the supply hose or
the appliance itself shows visible damage, or if the appliance has
been dropped or is leaking.
◗ Check the cord and the supply hose regularly for possible
damage.
◗ If the mains cord or the supply hose is damaged, it must be
replaced by Philips, a service centre authorised by Philips or
similarly qualified persons in order to avoid a hazard.
◗ Never leave the appliance unattended when it is connected to the
mains.
◗ Never immerse the iron or the steam tank in water.
◗ Keep the appliance out of the reach of children.
◗ The iron stand and the soleplate of the iron can become
extremely hot and may cause burns if touched. If you want to
move the steam tank, do not touch the stand.
◗ Do not allow the mains cord and supply hose to come into
contact with the soleplate when it is hot.
◗ When you have finished ironing, when you clean the appliance,
when you fill or empty the water tank and also when you leave
the iron even for a short while: set the steam control to position
O, put the iron on its heel and remove the mains plug from the
wall socket.