Table of Contents
Advertisement
REPLACING THE ELECTRODE
1.
Unscrew and remove the electrode collar. Turn collar counter-
clockwise.
2.
Gently rock the electrode side to side, while pulling it away from the
meter, until it disconnects from the electrode socket.
3.
To attach an electrode, align the slots and carefully plug the
electrode into the meter socket. CAUTION: Take care to align pins
carefully. Bent or broken pins will cause the meter to malfunction.
4.
Firmly tighten the electrode collar to create a seal with the rubber
gasket between the electrode and the meter.
20
LaMotte TRACER pH/TDS/Salt PockeTester
1766-KIT-01 Instruction
TM
Advertisement
Table of Contents
