Cutting, Sawing And Scraping - Hitachi CV 14DBL Handling Instructions Manual

CAUTION
○ When switching on the tool, make sure the application tool is not
in contact with the material to be processed. Failure to do so may
result in injury.
○ For cutting effi ciency, switch the speed of the application tool
according to task conditions and materials to be cut.
○ Do not apply any unnecessary pressure when operating the tool.
Doing so may damage the application tool.
○ After use, be sure not to place the tool near chips or sawdust
before it comes to a full stop as the tool may suck in those
particles.

CUTTING, SAWING AND SCRAPING

Sawing and scraping tasks require specifi c application tools (sold separately).
WARNING
○ Be absolutely sure to keep the switch turned off and the battery
removed to prevent any accident.
○ During operation, do not place your face or hands near the
application tool of the unit.
1. Switch the unit on and use the dial to set the speed of the application
tool.(Fig. 8)
2. Lightly place the application tool on the material and move the
application tool forward at a pace where the movement isn't slowed.
(Fig. 8)
Switch
Dial
Fig. 8
37
English