Table of Contents
Advertisement
8.7.2.1
Activate/Deactivate
Remote Access
m
1
Press
key in idle mode, scroll
:
to
ANSW MACHINE
m
, scroll
OK
and press
SETTINGS
:
to
REMOTE ACC.
m
.
OK
:
2
Scroll
to
DEACTIVATED
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
8.7.2.2
Controlling the
Answering Machine from
an external call
1
From another phone, dial home.
• The answering machine answers
and starts playing your greeting
message.
2
Within 8 seconds, press # key on the
phone you used to dial and enter the
remote access code (same as your
Master PIN code).
•
If the access code is incorrect, an
error tone will be emitted. After the
error tone is emitted, you can try to
press the remote access code again
until you enter the correct number.
• The answer machine will drop the
line immediately if there is no
detection of the master PIN entry
within 8 seconds.
• If the remote access code is correct,
a validation tone can be heard.
Telephone answering machine (TAM)
and press
:
to
ANSW
m
, scroll
OK
and press
or
ACTIVATED
m
and press
OK
The following table indicates how to
access the below features during remote
access procedure:
1
2
3
5
to
6
8
8.8
Call Screening
8.8.1
Set Handset Call Screening
If Handset call screening is set to
can hear the incoming message via the
handset speaker and decide whether or
not to pick up a call. To take the call,
r
press
.
This feature is deactivated by default.
1
Press
:
to
m
OK
SETTINGS
:
to
m
OK
2
Scroll
m
OK
• A validation tone is emitted and the
screen returns to previous menu.
Go to previous message
Play all recorded messages
(new and old) or play
current message again
Go to next message
Play the current outgoing
message
Delete current message
Stop message playback or
stop outgoing message
playback
m
key in idle mode, scroll
ANSW MACHINE
:
, scroll
to
ANSW
m
and press
HS SCREENING
.
:
to
or
ON
OFF
.
, you
On
and press
, scroll
OK
and press
and press
39
Advertisement
Table of Contents
