Saeco 0362.00B.77C Operating Instructions Manual page 14

14 PROGRAMMING MACHINE FUNCTIONS
The hardness of tap water may vary depending on the region. For this reason, the appliance
can be set according to the water hardness in the place where it is to be used, expressed
on a scale of 1 to 4.
The appliance is factory set on a hardness value of 3. The setting should be adjusted according
to the level of water hardness in the local area.
Press the button to set the
hardness measured with
the strip.
If 1 square changed colour, If 2 squares changed
set:
colour, set:
Dip the strip in water for 1 Check how many squares
second. change colour.
If 3 squares changed If 4 squares changed
colour, set: colour, set: