Page 2
We congratulate for having bought this top-quality espresso machine and thank you for choosing Saeco. Before operating the machine, we recommend to read the following instructions thouroughly which explain how to use, clean and maintain the machine.
Page 6
Fully automatic coffee machine Dear Customer, This fully automatic coffee machine allows the Warning brewing of either espresso or normal coffee, using both bean and pre-ground coffee. This The manufacturer declines any responsibility for coffee machine, as all electric appliances, must damages, occurring as a result of: be used with particular caution to avoid harm to •...
DESCRIPTION OF SYMBOLS How to use the instructions These instructions cannot anticipate every possible use of the machine, Save these instructions carefully and For further information or questions concerning make sure to hand them to other specific situations or problems, please contact users.
TECHNICAL DATA Voltage rating see rating plate on the back of the machine Nominal power 2300W Dimensions (length x width x height) approx. 385 x 330 x 395 mm Machine case metal and plastic material. Weight approx. 1 6 kg Cable length approx.
Page 10
SAFETY RULES Positioning Place the machine on a plane surface, Electrical parts should never be in contact where nobody can turn it upside down or with water: danger of short-circuit! Steam and be hurt. Hot water or overheated steam hot water may cause burns. Never direct might escape from the machine: danger steam or water jets towards the body;...
MACHINE CONTROLS AND PARTS Coffee grounds container Coffee bean container Grind adjustment lever Drip tray Coffee dosage adjustment lever Cup holder surface Service door Main switch Power cord Filling funnel Handle for assembling and disassembling Coffee dispensing unit of central unit Steam/hot water spout with burn-protection Central unit Coffee rest drawer...
INSTALLATION Unpacking/installation Standard packing is strong enough to protect the machine during mail shipping. Keep this package Parts under current shall never be in contact to return the machine to the manufacturer, with water: danger of short-circuit! Overheated whenever necessary. steam and hot water may cause burns.
DRAINAGE Before installing the water tank in the Furthermore, should the pump be defective, the machine, make sure coffee bean display shows: container cover is properly fitted. VENTILATE Install the water tank, slightly pressing over it to fit the valve which will open automatically. Do not fill the tank with an excessive Programming the machine quantity of water.
PROGRAMMING THE MACHINE the selected figures in a menu item using the necessary to test the water using the strip keys . The key ENT memorizes the supplied with the machine. Dip the strip into the selected options |for instance "ON" for the cup water for a second, shake off excess water heating plate).
Page 15
PROGRAMMING THE MACHINE Depending on the selection, the following mes- Hot water programming Whenever this function is enabled, the selected sages will be displayed: wafer amount is constantly dispensed. On the 5 TEMP. L. COFFEE contrary, whenever this function is disabled hot MEDIUM water is dispensed until the user stops the dis- pensing Hot water amount can only be...
Page 16
PROGRAMMING THE MACHINE Descaling ENT key. From the displayed submenu it is Move the asterisk at the end of the line to possible to select one of the following items by menu item "Descaling" and select it by means of the same keys .
Page 17
PROGRAMMING THE MACHINE or not saved: YES or NO. By means of the same keys , it is possible to modify the selected value (to reset the counter, Code entering for example). Press ENT to save a new value. On To enter the code, press keys and move the contrary, by pressing ESC the new value...
RECOMMENDATIONS reached, the following message is displayed: the COUNTER menu by means of keys and confirm the selection through ENT. Press the SELECT PRODUCT same keys to modify the selected value (for READY FOR USE example to set a new servicing limit). Through ENT a new value can be saved.
BREWING presso coffee, use special blends suitable for (max. 250 ml). During this operation, the following message is espresso coffee machines and special cups with Displayed: thick sides. iie'p coffee in a cool place, in an hermetically 1 SMALL COFFEE sealed container.
Page 20
BREWING Right before brewing coffee, fill the To program the hot water amount, it is necessary container with freshly ground coffee. to keep the corresponding selection key pressed For best results, make sure coffee till the desired amount is reached. blend is fresh.
SAFETY DEVICES When the fluid has reached the desired tempera- .live (28). Note: it is suggested to use milk with low fat ture, close the knob and immediately clean the amounts (1 .5°o|. spout with a damp cloth. Attention: the spout is hot, it may cause burns I Cappuccinatore cleaning Let the Cappuccinatore drain a full water con-...
Page 22
CLEANING AND MAINTENANCE OPERATIONS Important: Do not start the machine before the Central unit Clean central unit (22) whenever the coffee bean foreign body has been removed, otherwise the container is filled, or at least once a week. motor may be damaged. Procedures: see page 84, points 45-49.
Page 23
DESCALING Descaling Clean the coffee beans container periodi- Descaling removes limescale from all surfaces cally: this operation should be accomplished and holes, thus ensuring a perfect operation of by a qualified technician! Unplug the machine. valves, heating controls and other important Empty the coffee container and unloose the two parts.
Page 24
DESCALING Press the hot water key again. Go back to both to improve the coffee quality or to protect programming function by pressing the ENT key. the machine, thus reducing the descaling fre- Note: By pressing the ESC key (hot water key), it quency.
DESCALING Reset descaling message machine immediately. In programming function, by pressing keys To fix problems, follow the instructions in the move the asterisk at the end of the line table. Otherwise contact authorised personnel. on the menu item Sign. Descal. and confirm Only skilled personne are authorised to repair the the selection with the ENT button.
TROUBLESHOOTING Trouble Possible causes Solution No message is displayed The machine is not getting power Turn the main switch on, check plug and fuse The service door is open Close the service door The automatic coffee brewing does BREW UNIT MISS. Properly fit and lock the central not start .