Speaker Configurations - RCA RT2906 User Manual

Advanced Sound Control

Speaker Configurations

You can also change the setup of the speakers. Use
a subwoofer to enjoy optimum sound.
For optimum surround experience measure the
distance between the speaker and your favorite
listening position. Press DISTANCE to adjust the
speakers' distance values.
1. Press the DISTANCE button to show setup
options.
2. Continue to press the DISTANCE button until
the speaker you want to adjust is displayed.
3. Press / to change the speaker settings. Your
selection will be stored automatically.
4. Repeat step 2 and 3 to set up the next speaker.
You may adjust the distance within the following
ranges:
5. When set up is done, wait for five seconds to
automatically save your settings or press any
buttons to save your selection and set up mode.
Factory Default Speaker Distance Settings
Front
Left
Lch
L/S
Rear
Left
Center / Surround Speaker Setup
1. Press the SETUP button on the remote control
or front panel to show setup options.
2. Press / until CTR YES or SUR YES is displayed.
3. Press / to select between YES and No.
Front
Center
Right
Cch
Rch
R/S
Rear
Right
Notes:
CNTR stands for "Center Speaker"
selection while SURR stands for "Surround
Speaker" selection.
By default, the Center and Surround Speakers
are set to YES. If you decide not to use them,
set the ones you do not intend to use to NO so
that the sound performance is not affected.
Home Theater's Display Dimmer Control
1. Press the SETUP button to show setup options.
2. Press / until DIMMER 0 is displayed.
3. Press / to select between 0 and 1.
NIGHT Mode Selection
"Night Mode" will limit the volume on loud
passages of movies (such as action sequences)
while still allowing you to hear quiet passages
(such as dialog).
1. Press the SETUP button to show setup options.
2. Press / until "DIMMER 0" or "DIMMER 1" is
displayed.
3. Press / to select between DIMMER 0 and
DIMMER 1.
4. It is available only during Dolby Digital signal
playback.
SUBWOOFER Mode Selection
1. Press the SETUP button to show setup options.
2. Press / until current SUBWOOFER mode is
displayed.
3. Press / to select among "BALANCE", "STRONG",
"POWERFUL" or "SOFT " is scrolled once.
Restore To Factory Defaults
If you want to restore all settings to their factory
defaults, please do the following:
Press and hold the SETUP button on the front panel
for 10 seconds, at which time a message will be
displayed indicating that a factory reset is occurring.
You can then stop pressing the SETUP button.
Warning: All factory defaults will be restored except
for your radio station presets.
Many BD-Live compatible discs require content
to be downloaded onto USB flash drive in order
to access the available BD-Live features.
A USB flash drive with free space > 1GB needs
to be inserted prior to inserting the BD-Live
compatible disc.
- 17 -