Maintenance; Milk Circuit Rinse Cycle - Philips 10001838 Operating And Maintenance Manual

MAINTENANCE

To clean/maintain all of the machine's internal circuits, press the "maintenance" button on the main menu.
lock the Touch Screen (to
preform cleaning of the display).
begin washing the milk
circuits.
begin rinsing the milk
circuits.

MILK CIRCUIT RINSE CYCLE

To rinse the machine's internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk.
If it is not performed, the machine comes to a halt and does not allow the dispensing of milk beverages.
Before performing this function make sure that:
1. a large enough container is positioned under the spout.
2. the milk container has been correctly inserted in the machine;
3. the water tank contains a suffi cient quantity of water.
Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
milk circuit
start
rinsing
rinsing
cycle
AFTER USE, ALWAYS REMOVE THE MILK CONTAINER AND PUT IT IN THE REFRIGERATOR.
The container may be left in the machine only if it has been washed with drinking water and it does not contain
milk; see page 40.
In this menu you can:
lock
display
milk
maintenance
cleaning
cycle
milk circuit
rinsing
cycle
go back
rinsing milk circuit-
please wait
rinsing...
Wait for the cycle to fi nish.
The machine will return to the main
menu.
coffee
begin the wash cycle of the brew
cleaning
group.
cycle
descaling
perform the descaling cycle.
cycle
back to
menu
Remove the container, rinse and
dry.
27