Radio - JVC KW-X840BTS Instruction Manual

Radio

"STEREO" indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Search for a station
1 Press SOURCE B repeatedly to select FM or AM.
2 Press S / T (or press H / I on the remote control) to search for a
station automatically.
(or)
Press and hold S / T (or press and hold H / I on the remote
control) until "M" flashes, then press repeatedly to search for a station
manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the station is stored.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Turn the volume knob to select a preset number, then press the knob.
Other settings
1 Press and hold MENU.
2 Turn the volume knob to select an item (page 8), then press the
knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press MENU to exit.
To return to the previous setting item, press .
7
ENGLISH