Installation/Connection Basic procedure Remove the key from the ignition switch, then disconnect the terminal of the car battery. This section is for the professional installer. Connect the wires properly. See “Wiring connection” on page 3. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Install the unit to your car.
Page 3
Wiring connection Vehicle dashboard a Light blue/yellow: To the steering wheel remote control adapter Antenna terminal b Brown (not used) c Blue: To power antenna d Blue/white: To amplifier e Blue/white: Remote (12 V 350 mA) Fuse (10 A) f Orange/white: Illumination Factory wiring g Yellow: Battery 12 V harness (vehicle)
Adjust the volume Turn the volume knob. tools) inside the unit to prevent a short circuit. • For KW-R940BTS: If a disc error occurs due to condensation on the Select a source Press SOURCE B repeatedly. laser lens, eject the disc and wait for the moisture to evaporate.
Getting Started Set the basic settings Press and hold MENU. Cancel the demonstration Turn the volume knob to select an item (see the following table), then press the knob. When you turn on the power for the first time (or [FACTORY RESET] is set to Repeat step until the desired item is selected or activated.
CD/USB/iPod Selectable source: Search for a station • KW-R940BTS: CD/USB/iPod USB or iPod BT Press SOURCE B repeatedly to select FM or AM. • KW-X840BTS: USB/iPod USB or iPod BT Press S / T to search for a station automatically.
• Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: <http://www.jvc.net/cs/car/> • The availability of each item vary depending on the model. Turn the volume knob clockwise to select [SUBWOOFER SET], then press the knob.
Press MENU to exit the setting menu. Turn the volume knob to choose a color, then press the knob. • [COLOR 01] to [COLOR 49] • [USER]: The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown. • [COLOR FLOW01] to [COLOR FLOW03]: Color changes at Illumination Color Setting different speeds.
Press the volume knob. Press B SRC to turn on the unit. Select group or folder Press 1 J / 2 K. Search and select the name of your receiver (“KW-R940BTS”/ “KW-X840BTS”) on the Bluetooth device. Press S / T. Reverse skip/Forward skip Perform (A) or (B) depending on what appears on the display.