Eip Leds - Cisco 7000 Hardware Installation And Maintenance

EIP LEDs

The EIP contains a bank of 18 LEDs: one horizontal row of 3 LEDs for each of the 6 Ethernet
interfaces, as shown in Figure B-8.
As with the other interface processors, the enabled LED goes on to indicate that the EIP is enabled
for operation. Three LEDs for each port indicate the following:
•
Collision—A frame collision has been detected.
•
Transmit—Frames are being transmitted.
•
Receive—Frames are being received.
Figure B-8 EIP LEDs
Interface Processor LEDs
Reading LED Indicators B-271