Advertisement
Avaya Definity G1, G2, G3 and Prologix (PIC-A)
command to disable this test can only be accessed via "Maintenance"
level password.
8.13 Subscribers' station name field configuration may not contain
numbers other than the actual subscriber's extension. If numbers
other than the extension numbers appear within the name descriptors,
such as "Comp. Rm1, 3000" or "3000, Conf Rm.2", calls will not
integrate. Furthermore, all internal stations accessing the Octel
system (either as direct or forwarded calls) must not have more than
one set of numbers within the first 15 characters of the name field, as
this will cause loss of call integration. For Avaya G3 PBX's only,
an alternative to this requirement would be to implement the Special
Application Package SA7608, which provides the 7405ND
functionality. When configured as 7405ND telephone set types,
Octel ports will always receive calling/called station extension
numbers, not the name descriptor associated with the calling/called
station. If your site is going to be implementing this, changes to the
Set Emulation Call Table Setups must be made to fully support all
integration features. Contact Octel Technical Support to have those
changes made to your system. Refer to Section 5.0, page 7, for more
information.
8.14 PIC-A and other types of TIC's cannot be mixed within a line-card
group. Although it is possible to install mixed types of Telephone
Interface Cards (TIC's) on the same Octel 350, PIC-A's cannot be
installed within the same line-card group as other TIC's.
8.15 Hybrid telephone sets (7300-series) do not generate DTMF tones
when calling internal digital stations. This prevents subscribers,
calling from those telephone sets into PIC-A ports, from accessing
their mailboxes. Hybrid telephone sets do generate DTMF tones
when completing calls to analog stations and after connecting to
outside trunks, however, making it possible for subscribers to access
the Octel 350 if the system is equipped with ATIC ports or if
subscribers place calls to outside trunks routing back into the Octel
system pilot number.
8.16 Use of autodial and/or abbreviated dialing buttons to access the
Octel 350 is not supported. The PBX does not outpulse DTMF
tones that are part of autodial and/or abbreviated dialing digit strings
to digital stations; therefore, using this method to dial into the Octel
350 and automatically input the password will not work.
8.17 MSA administration is required for voice mail hunt groups that are
accessed by a "messaging split" vector step. In particular, this
functionality is required when a vector on an ECLIPS accesses an
Octel Voice Mail system, a Magix centralized voice mail system, or
any voice mail system that uses Mode Code integration to turn on
Message Waiting lights. For MultiVantage (MV) software V1.1.2
(both the "r" server [formerly G3r] and S8000 series servers use this
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
19
Confidential
Advertisement
