Using Loops - Native Instruments Traktor Kontrol S2 Manual

TRAKTOR DJ will save the Beat Grid location as a Hotcue point; this is why many tracks
will appear with one white Hotcue button.
When using TRAKTOR DJ's Loop Slicer, The S2's Hotcue buttons 1-4 control Slices and
illuminate green when the mode is engaged. Refer to the section on Using Loops.
When using TRAKTOR DJ's Freeze Mode, The S2's Hotcue buttons 1-4 control Slices and
illuminate blue when the mode is engaged. Refer to the section on Using Move Encoders/
Freeze Mode.
To delete any stored cue points, loops etc., hold the
cue button you wish to delete. The button will no longer be backlit.
Setting Hotcue Points
To make a new Hotcue point using the S2:
Press one of the available (non backlit) Hotcue buttons.
►
The selected Hotcue button will now be backlit blue.
→
5.2.6

Using Loops

You can use the S2 to perform Loop functions in TRAKTOR DJ by either manually engaging
the LOOP IN/OUT buttons, or by selecting a loop size with the Loop
to engage.
SHIFT button whilst pressing the Hot-
SIZE encoder and pressing
Traktor Kontrol S2 - Manual - 77
Using the S2 with TRAKTOR DJ
Using the Transport Section