Appendix C - Quick References; Quick Reference - Native Instruments Traktor Kontrol S2 Manual

13 Appendix C – Quick References
This appendix provides you with Quick Reference tables summing up the basic functionality of
each control element on your TRAKTOR KONTROL S2. This gives you a quick and concise
overview of all basic functions of your controller. For more info on each control element, please
refer to the descriptions in chapter
13.1

Quick Reference

See chapter ↑7, Hardware Control Reference
Control element
Remix Mode buttons A/B (be-
low REMIX knob)
Load buttons A/B (below
BROWSE encoder)
Jog wheel
Tempo fader
FLUX buttons
↑6, Hardware Overview.
for more details on these control elements.
Function
Switches the CUE/REMIX SLOTS buttons to Remix Deck mode. Lit when
Remix Deck mode is enabled. See
tion for more info on the CUE/REMIX SLOTS section modes.
Normal: loads selected track on the respective Deck.
SHIFT: copies and pastes the content of the opposite Track Deck to the
Deck.
Lights up when you press the jog wheel's top plate.
Outer rim: tempo bending.
Top plate: scratch control (direct control on playback position).
SHIFT + top plate: seek through track (fast forward / rewind).
In Loop: hold LOOP IN / LOOP OUT button and spin the jog wheel to fine-
tune the Loop In Point / Loop Out Point.
Increases/decreases Deck tempo.
Hold SHIFT to move the fader without altering the tempo.
Engage TRAKTOR'S Flux mode when pressed.
Press SHIFT + FLUX to reset a Deck's tempo.
Appendix C – Quick References
↑7.5, Using the CUE/REMIX SLOTS Sec-
Traktor Kontrol S2 - Manual - 169
Quick Reference