Headphone Cueing - Native Instruments Traktor Kontrol S2 Manual

5.1.6

Headphone Cueing

The CUE VOL knob located on the front panel of the S2 adjusts the volume levels of the head-
phone output. The CUE MIX
channel only, or both signals in your headphones.
The Headphones input and CUE controls on the front panel of the S2.
Cueing a track in your headphones works in the following way:
1. Load Decks A and B each with a track.
2. Click the PLAY button on both Decks to begin playback.
3. Turn the CUE MIX
4. Set the headphone volume to a comfortable level by adjusting the
5. With the channel faders up, move the crossfader back and forth to hear one track, then
the other.
6. Move the crossfader all the way to channel A so that you are only hearing the track on
Deck A. At the same time bring the channel volume fader all the way down for channel B.
7. Press the CUE button B.
The button lights up, indicating that Deck B is now sent to the Cue channel, which you
now hear in the headphones. Note that now, no matter where you move the crossfader,
you will still hear Deck B, because its cue is on.
8. Press CUE button B again to toggle it off and press
You will now hear the track playing on Deck A, no matter what position the crossfader is
in. This is due to the fact that Deck A's Cue button is on, and the
the center position.
9. Press both CUE buttons A and B so that they are both active (illuminated).
10. Turn the CUE MIX
11. Now toggle the two
(unilluminated), there is no signal at all coming through the headphones.
knob determines whether you hear the main mix only, the cue
knob to the center position.
knob all the way to the left.
CUE buttons on and off. Notice that when both Cue buttons are off
Key S2 Functions Using TRAKTOR DJ
CUE VOL
CUE button A.
CUE MIX
Traktor Kontrol S2 - Manual - 71
Using the S2 with TRAKTOR DJ
knob.
knob is still in