One-Touch Recording 33 - Philips CCZ196AT Owner's Manual

CCZ196comb.QX33 4/6/99 7:05 PM
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours
long without setting the timer.
Before you begin, make sure:
Channels are set up.
There is a tape in the TV/VCR. The record tab must be intact.
1
Press the COMBI button, then use the CH(annel).
Up/Down buttons or the Number buttons to select the
channel you want to record.
2
Press the SPEED button until the desired recording speed
(SP, LP, or SLP) appears on-screen. Details are on page 32.
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length appears in the upper right cor-
ner of the screen. Recording will begin immediately. The
REC(ord) light will appear.
OTR LENGTH 0:30
CH12
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the
CLEAR button, then press the STOP/
remote control.
Page 33
button on the

One-Touch Recording 33

4 Press the STOP/EJECT but-
ton on the TV/VCR to stop
the OTR.
POWER EJECT
2
SLEEP SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
3
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
A.CH +100
VOL.
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW MUTE
TRACKING F.ADV SLOW
SMART SMART SKIP INDEX
PICTURE SOUND SEARCH SEARCH
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired recording length appears
on-screen.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
• You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 43.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
1