Philips CCZ196AT Owner's Manual page 37

CCZ196comb.QX33 4/6/99 7:05 PM
8
Press the Number 1 button to record in SP speed, press
the Number 2 button to record in LP speed, or press the
Number 3 button to record in SLP speed. Details about tape
speed are on page 32. You cannot use the SPEED button at this
time.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 LP=2 SLP=3
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
9
Press two Number buttons for the month and two
Number buttons for the day you want the program to
record. For example, for July 10, 1998, press 07, 10. The day of
the week and the year will be displayed automatically. (You cannot
program the TV/VCR to record more than one year in advance.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/98
FRIDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED PLEASE TURN OFF FOR TIMER RECORDING will
appear on-screen.
If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on-screen.
If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on-screen. If this happens,
insert a different tape.
If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Turn off the TV/VCR power. The REC(ord) light will flash. If
you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts.
Page 37
Timer Recording (cont'd) 37
11
POWER
SLEEP SPEED
REC/OTR
PLAY
REW
STOP
STATUS/EXIT
10
1 2 3
4 5 6
7 8 9
8
0
A.CH +100
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW
TRACKING F.ADV
SMART SMART SKIP INDEX
PICTURE SOUND SEARCH SEARCH
The TV/VCR must be
off for a timer record-
ing! Make sure there is
a tape in the TV/VCR.
Helpful Hints
• PROGRAM NOT COMPLETED /
CLASH may appear on-screen when
you finish setting a timer recording.
This means that the timer recording
you just programmed and another
timer recording overlap, and thus
the current timer recording will not
be carried out.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
Please see page 58 for more
Helpful Hints.
EJECT
MEMORY
PAUSE/STILL
F.FWD
CH.
9
VOL.
MUTE
SLOW