Philips CCZ196AT Owner's Manual page 7

CCZ196comb.QX33 4/6/99 7:04 PM
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 34.
AUDIO/VIDEO OUT
Jacks on VCR
ANT
AUDIO
L
OUT IN
R
VIDEO
CH3 CH4
IN
OUT
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• Audio and video cables are not supplied.
• A stereo audio cable (not supplied) is used here to deliver audio to the TV/VCR's left and right channels.
Crooked Pin
Page 7
IN
Use a Video cable to connect the VIDEO
OUT
OUT Jack on the VCR to the VIDEO IN
Jack on the rear of the TV/VCR.
Use an Audio cable to connect the AUDIO OUT Jacks on
the VCR to the AUDIO IN Jacks on the rear of the TV/VCR.
Helpful Hints
Bent pin
Plug
Cable
Hooking Up The TV/VCR (cont'd) 7
L
AUDIO IN
ANT.
R
VIDEO IN
Straight Pin
L
AUDIO IN
ANT.
R
VIDEO IN
AUDIO/VIDEO IN Jacks
on the rear of TV/VCR