Hooking Up The Tv/Vcr - Philips CCZ252AT99 Owner's Manual

CCZ252comb.QX33 4/6/99 8:50 PM
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
• Before connecting the rod antenna or coaxial cable to the ANT(enna) Jack, make sure the pin is not bent. If
the pin is bent, straighten it as illustrated, then connect it to the ANT(enna) Jack.
• Audio and video cables are not supplied.
Crooked Pin
Page 7
Hooking Up the TV/VCR (cont'd) 7
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO (In)
Jack on the front of the TV/VCR.
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO (In) Jack on the front of the
Helpful Hints
Straight Pin
AUDIO VIDEO
AUDIO POWER STOP REW
REC EJECT
AUDIO/VIDEO Jacks
on front of TV/VCR
PLAY F.FWD REC/OTR VOLUME CHANNEL EARPHONE