Timer Recording - Philips CCZ252AT99 Owner's Manual

CCZ252comb.QX33 4/6/99 8:50 PM

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV
programs while you're away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
The clock is set. If not, CLOCK MUST BE SET appears.
Channels are set up.
There is a tape in the TV/VCR. (Make sure the tape's record
tab is intact and the tape is long enough to record the pro-
gram.)
Complete each step within 60 seconds of completing the
previous step. If you don't, you may start again at step 1.
1
Press the MENU button.
>
PRIM. SETUP PRESS B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/
VCR PROGRAM, then press the F.FWD/B button.
PRIM. SETUP
> PRESS B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
3
Select a once, daily or weekly recording.
Press the Number 1 button to select ONCE. The TV/VCR will
record a TV program on any day you choose, up to 12 months
away.
Press the Number 2 button to select DAILY. The TV/VCR will
record from Monday through Friday – starting at the same time
and recording the same channel for the same length of time
every day.
Press the Number 3 button to select WEEKLY. The TV/VCR
will record the same channel on the same day, at the same time,
and for the same length of time every week.
VCR PROGRAM
1 ONCE
2 DAILY (MON - FRI)
3 WEEKLY
4 PROGRAM REVIEW
TO SELECT PRESS NUMBER
TO END PRESS EXIT
Page 32
button or the STOP/ button to select
3
2 3
1
5 6
4
o
8 9
7
p
0
+100 o
2
p
o
PLAY
REW F.FWD
STOP
p
o
1
p
Helpful Hints
• If the power fails, programmed
timer recordings will be restored
when the clock is reset. (The clock
will reset itself automatically if you
are using the AUTO CLOCK feature.
Details are on pages 14 - 17. If
you are not using the AUTO CLOCK
feature, reset the clock manually.
Details are on pages 12 - 13.) The
timer recording will not occur only if
the timer recording was scheduled
to take place during the power fail-
ure.
• You cannot set a timer recording if
RECORD DEFEAT is set to ON.
Details are on page 36.