Automatic Channel Setup - Philips CCB255AT Owner's Manual

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
1
Press the COMBI button, then press the MENU button.
PRIM. SETUP PRESS
> B
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/ button or the STOP/
PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
SELECT LANGUAGE
>
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/ button or the STOP/
AUTO PROGRAMMING, then press the F.FWD/B button.
AUTO CH PROGRAMMING ... will appear on the screen. The
TV/VCR distinguishes between TV channels and cable channels auto-
matically, and the TV/VCR will memorize its available channels.
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number placed in the TV/VCR's memory will
appear on the screen. Now, when you press the CH(annel) m m /n n
button, you will scan only through channels you receive.
button to select
button to select
2-3
POWER
SLEEP/WAKE UP SPEED
REC/OTR
PLAY
REW
STOP
1
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
FM SURF
CABLE/DBS COMBI
VCR PLUS+
/ENTER
VAR.SLOW
TRACKING F.ADV
SMART
SKIP INDEX
PICTURE SOUND SEARCH SEARCH
4 Wait for the TV/VCR to set up
channels.
Helpful Hint
• Line Input mode will always be
stored in the TV/VCR's memory as
channel 00. You cannot select
AUTO PROGRAMMING at step 3 if
the TV/VCR is on channel 00 (A/V
IN).
EJECT
MEMORY
PAUSE/STILL
F.FWD
CH.
VOL.
MUTE
SLOW