Setting The Sensitivity Of Station Seek Tuning; Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations - Blaupunkt CANBERRA 7 647 523 310 Operating And Installation Instructions

Radio mode Radio mode
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good recep-
tion or whether it can also tune into those
with a weak reception.
Press the M/OK button >.
u
The display shows "MENU".
u
Press the or
until "SENS" and the currently set value
appears on the display.
"SENS HI6" means that the tuner is set to the
highest sensitivity setting. "SENS LO1" means
it is set to the lowest sensitivity setting.
Press the M/OK button > to change the
u
set value.
u
Set the desired sensitivity level using the
button 5.
or
When you have fi nished making your chang-
es,
press the M/OK button >.
u
To exit the menu,
u press the ESC button 6 or wait approx.
8 seconds.
Note:
You can set different sensitivity levels
for FM and AM (MW/LW).

Storing stations

Storing stations manually
u
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands (MW
or LW).
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 5 = for longer than two sec-
onds to assign the station to that button.
44
button 5 repeatedly
Storing stations automatically
(Travelstore)
You can automatically store the fi ve stations
offering the strongest reception in the region
(only FM). The stations are stored in the FMT
memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
u
Press and hold down the BND/TS button
4 for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the station
that is stored in memory location 1 of the
FMT memory bank.

Listening to stored stations

u
Select the memory bank or waveband.
u Press the station button 1 - 5 = of the
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Starting SCAN
u
Press and hold down the M/OK button
> for longer than two seconds.
Scanning begins. "SCAN", the station name
or the frequency are intermittently shown on
the display.