Safety And Instructional Decals - Exmark STANDON Series Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
116-8225
1. Entanglement hazard-Stop the engine before reaching
underneath; stay away from moving parts; keep all
guards in place.
126-1400
1. Warning-Read the Operator's manual. Use only Exmark
riding attachments. Use of other riding attachments may
create a hazardous condition resulting in injury.
1. Crushing hazard of sulky — read the Operator's manual; Do Not allow sulky to rotate beyond 90 degrees; dismount sulky
and place in transport position, if available, before operating in reverse.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
decal116-8225
1. Pinch point hazard–Do Not use drawbar to lift StandOn.
Only use platform side handles to lift and rotate
StandOn.
decal126-1400
126-1411
6
133-8061
135-0300
decal133-8061
decal135-0300
decal126-1411