Multi-Channel Television Sound System - Philips VRA999PH Owner's Manual

To receive and record programs broadcast in second audio, follow steps 1-6. To receive and record a
program broadcast in stereo, make one of the connections shown, then follow steps 1-6.
If you have a Stereo and a Monitor TV,
use a video cable to connect the VCR's
VIDEO OUT Jack to the TV's VIDEO IN
Jack. Use audio cables to connect the
VCR's AUDIO OUT Jacks to the
Stereo's AUDIO IN Jacks.
1
Press the VCR button, then press the MENU button.
SELECT , 9 CHOOSE :/OK
A VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the FF :/OK button.
SELECT , 9 CHOOSE :/OK
A ON SCREEN MODE
ON
BLUE BACKGROUND ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
AUDIO OUT HIFI
STEREO/SAP STEREO
NEXT PAGE
TO END PUSH EXIT
3
Press the PLAY 8 or STOP 9 button to select
STEREO/SAP on the first page of the VCR SET UP menu,
then press the FF :/OK button to select SAP (for a Second
Audio Program) or STEREO, whichever you prefer.
4
Press the EXIT/STATUS button.
5
Use the CH(annel) 8/9 button to select a channel to
record.
Press the EXIT/STATUS button to access the on-screen status
display and to make sure the program is being broadcast in stereo
or second audio.
6
Press the REC(ord)/OTR button to start recording.
Multi-Channel Television Sound System (cont'd) 53
LP 30561-003
IN OUT
CABLE
BOX
R
S-VIDEO AUDIO
IN OUT
L
(MONO)
VIDEO CH3
AUDIO
VIDEO
ANT. IN
RF OUT
IN OUT
CH4
R
R
L L
ANT. IN
(MONO)
RF OUT
• If you want to connect the VCR to a
Stereo TV, follow these steps.
1) Connect the antenna or cable signal
to the VCR's ANT(enna) IN Jack.
2) Use stereo audio cables to connect
the VCR's AUDIO OUT Jacks to the
TV's AUDIO IN Jacks.
3) Use a video cable to connect the
VCR's VIDEO OUT Jack to the TV's
VIDEO IN Jack. (Or, to improve picture
quality, you may connect an S-Video
cable to the S-VIDEO OUT jack on the
VCR and to the S-VIDEO IN jack on
the TV instead.)
• Make sure the TV and the Stereo (if
applicable) are in Line Input or
Auxiliary mode. Please refer to your TV
or Stereo owner's manual for details.
OR, if you have a single-speaker
TV, use an RF coaxial cable to
connect the VCR's RF OUT Jack to
the TV's ANTENNA IN Jack.
Helpful Hints