Manual Pbs Channel Selection - Philips VRA999PH Owner's Manual

18 Setting the Clock (cont'd)

Manual PBS Channel Selection

1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
3
Press the PLAY 8 or STOP 9 button to select CLOCK,
then press the FF :/OK button. CABLE BOX USERS SET
CLOCK MANUALLY will appear briefly.
(If AUTO CLOCK is set to OFF, PBS CH. will not be available in
the menu. If this happens, press the FF :/OK button to select
AUTO CLOCK, then press the PLAY 8 or STOP 9 button to
set AUTO CLOCK to ON.)
TIME – – : – – AM
DATE 01/01/99
AUTO CLOCK ON
PBS CH. AUTO
D.S.T. AUTO
TIME ZONE AUTO
TO SET PUSH ,9 THEN :/OK
TO END PUSH EXIT
4
Press the FF :/OK button to select PBS CH.
5
Press the PLAY 8 or STOP 9 button repeatedly to select
the station number of your PBS channel.
6
Press the EXIT/STATUS button.
7
An on-screen message will ask you to turn off the VCR.
Press the POWER button to turn off the VCR.
Auto will flash in the display panel until the clock is set. Leave the
VCR power off until the clock is set.
If – – : – – appears on the display panel after you turn off the
VCR for several minutes, the VCR could not find the time. Repeat
steps 1-6 above, entering a different PBS channel at step 5. Or,
use a different method to set the clock.
1
CBL / DBS TV VCR
VCR/TV POWER EJECT
7
QUICK PROGRAMMING
+ +
1 2 3
START STOP DATE
- -
4 5 6
DBS DAILY WEEKLY
7 8 9
0
SPEED CLEAR
STILL/SLOW
- +
REW FF
PLAY
/OK
STOP
VOL CH
MENU
EXIT/STATUS
TIMER
SMARTPICTURE INDEX AUDIO/MUTE
JOG/SHTL /OTR
REC REC
REV FWD
2-5
6