Table of Contents
Advertisement
24 Display Panel
VCR Display Panel
Information about VCR operations appears
here. Different information appears at
different times. The display is brighter when
the VCR power is on. The display dims
automatically when you turn off the VCR
power.
S-VHS Indicator
Appears while
playing a tape
OPEN
A/V FRONT CONNECTORS-
recorded in
S-VHS or S-VHS
ET format, or
while recording on
an S-VHS tape or
in S-VHS ET
format.
Audio Level Indicator
This indicator shows the audio
playback level. NORM appears
only when you select MONO
at step 3 on page 54.
Operation indicators
These indicators tell you the
current operation of the VCR.
3 : Play, Forward and Reverse
Searching
\ : Record
\I : Record Pause
3I : Still Picture
Cassette-Inside Light
This light appears when a tape is in the
VCR. It blinks when a tape is being
ejected. This light blinks rapidly if the VCR
is turned off to set a Timer Recording but
there is not a tape in the VCR.
VCR Light
This light appears when the
VCR is in VCR position.
Cassette Compartment
Insert a tape here.
VRA 999
S-VHS HI-FI STEREO
POWER
S-VHS ET
SMARTPICTURE
MENU/EXIT
VCR/TV
-
/OK
ON SCREEN DISPLAY
lingual
+8
4
0
6
-15
dB
VCR
NORM
Remote Sensor
Receives a signal from your remote
control so you can operate your VCR
from a distance. Press the VCR button
on the remote control before pressing
other VCR operation buttons.
STOP/EJECT
SUPER VHS ET
HI FI STEREO SMARTPICTURE
REC/OTR
+8
4
SP
0
PAUSE/STILL
6
CHANNEL
-15
dB
VCR
NORM
SP
Clock/Counter/Channel Display
Each time you press the EXIT/STATUS button,
information on the display panel will change. When
tape playback is stopped, press the EXIT/STATUS
button repeatedly to see: the current time (when the
clock is set); the real-time counter; and the current
channel number. During tape playback, press the
EXIT/STATUS button repeatedly to see the real-time
counter or the current time.
If a dash (-) appears to the right of the clock when the
VCR power is off, Child Lock is activated. Details are on
page 59.
Line Input Mode
When L-F appears on the display panel, you have
selected A/V IN FRONT. Your audio and video or S-
Video cables should be connected to the
AUDIO/VIDEO or AUDIO/S-VIDEO jacks on the front
of the VCR if you are dubbing tapes.
When L-1 appears here, you have selected A/V IN
REAR. Your audio and video or S-Video cables should
be connected to the AUDIO IN/VIDEO IN or AUDIO
IN/S-VIDEO IN jacks on the back of the VCR if you are
dubbing tapes.
To select A/V IN FRONT or A/V IN REAR, press 0,
then press the CH(annel) 8/9 button so that A/V IN
FRONT or A/V IN REAR appears on the screen briefly.
To exit Line Input mode, press the Number buttons or
the CH(annel) 8/9 button to select another channel.
Tape Speed
Lights
These lights indicate
SUPER
VHS ET
the current tape
speed. This VCR
will play tapes
recorded in LP
PLAY
speed, but LP will
not appear on the
display panel. This
VCR will not record
in LP speed. Details
are on page 62.
Advertisement
Table of Contents
