Replacing Printed Circuit Board "F" & "F2 - Janome MC350E Service Manual

MC350E
Replacing Printed Circuit Board "F" & "F2"
Printed circuit board F2
A
B
Printed circuit board F
To remove:
1. Remove the front cover. (See page 6)
2. Pull out the connector from the printed circuit
board "A" (Mainboard).
3. Remove Screws
the Printed circuit board "F" (Start/Stop)
To attach:
4. Follow the above procedure in reverse.
To remove:
1. Remove the front cover. (See page 6)
2. Pull out the connector from the printed circuit
board "A" (Mainboard).
3. Remove Screws
the Printed circuit board "F2" (Start/Stop)
To attach:
4. Follow the above procedure in reverse.
A
Screws
B
Screws
22
A
(2 pieces) and remove
B
B
(2 pieces) and remove
.
.