Table of Contents
Advertisement
11.7.1
IGNITION
• Turn the selector (see Fig. 28 page 27) on ignition position to allow the direct flow of the smokes from the
furnace to the flue. Open the rings on the cooking plane and put the internal deflector on right position
(POS.A-B see Fig. 30 page 28 and Fig. 31 page 29). Turn to maximum the thermostatic air regulator (see
Fig. 27 page 27).
• Open the furnace door (pos. 3) and introduce on the grid some paper and a small quantity of dry, thin wood,
then light it on.
• When the fire is on, complete the loading of the furnace, trying to put wood logs not too tight. In this way
the primary air will be allowed to pass trough the spaces between the logs well touching all the fuel surface.
• Once ignitio is completed, turn smokes selector back to vertical position (see Fig. 28 page 27) and turn the
DEMETRA
Fig. 31 - Heating-cooking
LEGEND
Fig. 31 page 29
1
Heating-cooking
2
Deflector in the normal position
3
POS.B
Fig. 32 - Heating-oven baking (high temperature)
LEGEND
Fig. 32 page 29
1
Heating-oven baking (high temperature)
2
Deflector position HT (high temperature)
3
POS.C
EN
29
Advertisement
Table of Contents
