Blaupunkt BRISTOL CD36 Operating Instructions Manual page 8

Radio cd
Table of Contents

Advertisement

Note:
If the vehicle ignition was switched
G
off before you inserted the CD,
you will first have to switch on the
device by pressing button 1 in
order to start playing the CD.
Remove the control panel.
The unit switches off.
Attach the control panel again.
The unit switches on. The settings (ra-
dio, CD, CD changer or AUX) that were
set before the unit was switched off will
be reactivated.
You can adjust the volume in steps
from 0 (off) to 66 (maximum).
To increase the volume,
button 4.
press the
To decrease the volume,
button 4.
press the
Note:
The device is equipped with a
G
timeout function. If, for instance,
you press the MENU button 7
and select a menu item, the de-
vice will switch back approx. 8
seconds after the last button was
pressed. Any changes to the set-
tings that you have made will be
saved.
You can set the power-on volume.
Press the MENU button 7.
Press the
or
peatedly until "ON VOLUME" ap-
pears in the display.
Adjust the power-on volume using
buttons 8.
the
To help you adjust the setting more
easily, the device will increase or de-
crease the volume as you make your
changes.
If you change the setting to "LAST
VOL", the volume level that was set the
last time you switched off the device
will be activated again.
button 8 re-
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vancouver cd36

Table of Contents