Table of Contents
Advertisement
If you want to use the RDS functions
(AF and REGIONAL),
➮
press and hold down the TRAF
RDS button : for longer than two
seconds.
The RDS function is active when the
RDS symbol is shown in the display.
➮
Press the MENU button 7.
➮
Press the
or
peatedly until "REG" appears in
the display. "OFF" or "ON" is dis-
played alongside "REG".
➮
To switch REGIONAL on/off, press
button 8.
the
or
➮
Press the MENU button 7.
You can use this device to receive pro-
grammes broadcast over the FM fre-
quency range as well as the MW and
LW (AM) wavebands. There are three
memory banks available for the FM
waveband (FM1, FM2 and FMT) and
one for each of the MW and LW wave-
bands. Six stations can be stored in
each memory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮
briefly press the BND•TS button
<.
34
button 8 re-
There are various ways of tuning into
a station.
➮
Press the
or
The radio tunes into the next receiva-
ble station.
You can also tune into stations manu-
ally.
Note:
You can only tune into stations
G
manually if the RDS function is
deactivated.
➮
Press the
or
If radio stations provide several pro-
grammes, you have the option of
browsing through their "broadcasting
networks".
Note:
The RDS function must be activat-
G
ed before you can use this fea-
ture.
➮
Press the
or
switch to the next station on the
broadcasting network.
Note:
When using this feature, you will
G
only be able to switch to stations
that you have received once be-
fore already. To receive the sta-
tions, use the scan function or the
Travelstore function.
button 8.
button 8.
button 8 to
Hide quick links:
Advertisement
Table of Contents
