Blaupunkt BRISTOL CD36 Operating Instructions Manual page 13

Scanning begins. "SCAN" appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
➮
Press the MENU button 7.
Scanning stops and the radio contin-
ues playing the station that it tuned into
last.
➮
Press the MENU button 7.
➮
Press the or
peatedly until "SCAN TIME" ap-
pears in the display.
➮
Set the desired scanning time us-
buttons 8.
ing the
When you have finished adjusting the
setting,
➮
press the MENU button 7 twice.
Note:
The scanning time that you set is
G
also used when scanning in CD
mode and in CD-changer mode.
Besides transmitting the station name,
some FM stations also provide infor-
mation on the type of programme they
are broadcasting. Your car radio can
receive and display this information.
For example, the programme types
can be:
CULTURE TRAVEL
SPORT NEWS
ROCK CLASSICS
36
button 8 re-
JAZZ
POP
You can use the PTY function to se-
lect stations of a particular programme
type.
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Notes:
If the tuner does not find a station
G
that matches the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefly in
the display. The radio will then re-
tune to the station that it received
last.
If the tuned radio station or anoth-
G
er station on the broadcasting net-
work broadcasts your selected
programme type at a later point in
time, the radio will automatically
switch from the currently tuned
station or from CD mode or CD-
changer mode to the station
whose programme type matches
the one you selected.
If you do not want this PTY EON
G
switching, disable it in the menu
with "PTY OFF". First, press one
of the SRC
tons <.
➮
Press the MENU button 7.
➮
Press the or
peatedly until "PTY ON" or "PTY
OFF" appears in the display.
= or BND•TS but-
button 8 re-