Related Manuals for NatComm Ring Delay Switch
Summary of Contents for NatComm Ring Delay Switch
- Page 1 RING DELAY SWITCH USER GUIDE For Technical Assistance email the Manufacturers direct info@natcomm.us NATCOMM USA LLC Responsible Supplier Code :NC...
- Page 2 Page 2 Natcomm...
- Page 3 DESCRIPTION Ring Delay Switch is designed to DELAY the ring from an Incoming Telephone Call connecting to a specific device for between 1 and 8 rings. This Product is ideal for the following applications : • Delaying Answer by an Answering Machine •...
-
Page 4: Installation
4. RING DELAY DEVICE CONNECTION (The device which DOES require Ring Delay). Connect this device to the RING DELAY port of Ring Delay Switch, using the cable supplied with the device. 5. SET DIP SWITCHES TO DESIRED SETTINGS... - Page 5 RING DELAY SETTINGS Ring Delay Switch Settings Important Note - Switch 1 MUST be set to the OFF position Ring Delay Switch 2 Switch 3 Switch 4 Required 1 Ring 2 Rings 3 Rings 4 Rings 5 Rings 6 Rings...
-
Page 6: Troubleshooting
Dip Switch 1 to the ON position. When Dip Switch 1 is set to the ON position, Ring Delay Switch will leave your Telephone device connected to your telephone line when your line is not in use. It... - Page 7 PBX SYSTEM OPERATION Ring Delay Switch can also be used to connect a Telephone Device that requires a Ring Delay, to a standard PSTN Line of a Multi-Line PBX Telephone System. This is done by connecting the Ring Delay Switch direct to an incoming telephone line, prior to the system controller.
-
Page 8: Specifications
Damage caused to this device or attached equipment by lightning strikes or over voltage surge is not covered under this warranty. THE CASE IS SEALED AT THE FACTORY OPENING THE CASE WILL VOID THE WARRANTY. Page 8 Natcomm...