Decadic to Tone Dialler USER GUIDE For Technical Assistance call the Manufacturers direct ph 800 530 8645 8AM - 5PM West Coast Pacific Time NATCOMM USA LLC Responsible Supplier Code :NC...
PRODUCT DESCRIPTION Our DTD Decadic to Tone Dialler is designed to allow existing Pulse Dial only devices to work with PSTN Telephone Lines or with New Generation IP Fiber or Cable Lines, which provide Analog outputs for use by conventional Analog Telephone Devices.
Using the supplied Modular - Modular line cord, connect the Telephone Device or Devices which you intend to operate from DTD direct to TELEPHONE LINE OUT port of DTD. Connect the supplied 12V POWER ADAPTOR and switch the POWER ON. Natcomm Page 3...
Damage caused to this device or attached equipment by lightning strikes or over voltage surge is not covered under this warranty. THE CASE IS SEALED AT THE FACTORY. OPENING THE CASE WILL VOID THE WARRANTY. Page 4 Natcomm...