Cd Play; Playback Information - Philips AX 2003/01 User Manual

CD PLAY

Playing a CD
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider to open the player.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3 Close the player by pressing the lid down.
4 Press 2; to switch the player on and start playback.
The current track number and elapsed playing
y
time are displayed.
• You can pause playback by pressing 2;.
The time at which playback was paused starts
y
flashing.
• You can continue playback by pressing 2; again.
5 Press 9 to stop playback.
The total number of tracks and the total playing
y
time of the CD are displayed.
6 Press 9 again to switch the player off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
12

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,
nF dISC is displayed, indicating that the CD has not been finalized. In that
case, use FINALIZE on your CD recorder to complete the recording.
• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds
after pressing 2; for sound reproduction to start.
• Playback will stop if you open the CD lid.
• While the CD is read, 1 -:- flashes in the display.
Volume and bass
Volume adjustment
• Adjust the volume by using VOL E.
Bass adjustment
You can choose between the bass enhancement levels
dbb1 and dbb2.
1 Press BASS once for dbb1 and twice
for dbb2.
dbb1 or dbb2 is displayed and
y
is shown.
2 To switch dbb1 or dbb2 off, press BASS
twice or once, respectively.
y
0
goes off.
CD PLAY
13