Siemens SIPROTEC 7VE61 Manual page 4

Multifunction paralleling devices, communication module, modbus, bus mapping

Hide thumbs Also See for SIPROTEC 7VE61:

3UHIDFH

9DOLGLW\

$GGLWLRQDO 6XSSRUW

7UDLQLQJ FRXUVHV

7DUJHW DXGLHQFH

This manual is valid for the SIPROTEC devices:

• 7VE61, 7VE63 (firmware version 4.0 or higher),

with

• Modbus communication module version 03.00.04 or higher.

For device parameterization have to be used:

• DIGSI 4.3 or higher,

• Modbus standard mappings 3-n

(n = device type dependent number of standard mappings).

For questions regarding SIPROTEC4 devices, please contact your Siemens repre-

sentative.

Individual course offerings may be found in our Training Catalog and questions can be

directed to our Training Centre. Please contact your Siemens representative.

Protection engineers, commissioning engineers, personnel concerned with adjust-

ment, checking and service of selective protective equipment, automatic and control

facilities and personnel of electrical facilities and power plants.

SIPROTEC Modbus - Bus mapping 7VE61, 7VE63

C53000-L1840-C017-03

Siprotec 7ve63