Advertisement
5HJLVWHUV WR ,QWHUQDO FRPPDQGV
'HVLJQDWLRQ RI WKH
5HJLVWHU
6,3527(& REMHFWV
Command: Setting Group A
00045
Indication: Setting Group A
Command: Setting Group B
00046
Indication: Setting Group B
Command: Setting Group C
00047
Indication: Setting Group C
Command: Setting Group D
00048
Indication: Setting Group D
SIPROTEC Modbus - Bus mapping 7VE61, 7VE63
C53000-L1840-C017-03
&KDQJLQJ WKH VHWWLQJ JURXS
• In order to change the setting group, the value "1" = ON must be transmitted to the
corresponding register.
• Switching ON one setting group automatically switches OFF the current active set-
ting group.
• Transmission of the value "0" = OFF is insignificant for the change of the setting
group and is refused by the device.
1RWH
A change of the setting group is only possible via Modbus if the parameter &KDQJH
WR $QRWKHU 6HWWLQJ *URXS (parameter address = 302) has the value 3URWRFRO.
&RPPHQWV
0 = not permitted
1 = Activation of setting group A
0 = Setting group A is not active
1 = Setting group A is active
0 = not permitted
1 = Activation of setting group B
0 = Setting group B is not active
1 = Setting group B is active
0 = not permitted
1 = Activation of setting group C
0 = Setting group C is not active
1 = Setting group C is active
0 = not permitted
1 = Activation of setting group D
0 = Setting group D is not active
1 = Setting group D is active
0RGEXV UHJLVWHU PDS
,QWHUQDO
REMHFW QR
-
-
-
-
1-5
Advertisement
