Advertisement
100 $
3 Position Momentary
2 Position Maintained
3 Position Maintained
2 Position Momentary
3SB5 Selector Switch short knob positions
Mounting of 3SB5 Twin Push Button Actuator
Step 1: Pass Twin Push Button Actuator (35) through the cut out of the Panel (2) from front, into the Holder with
Contact Blocks (36)
Step 2: Lock the Twin Push Button Actuator (35) into the Holder with Contact Blocks (36) by turning it clockwise.
Caution:
1. The Twin Push button actuator (35) should be assembled in such a way that the Pusher with symbol '0' (37)
of Twin Push button actuator (35) should be on the Top, & should actuate the NC Contact Block only.
2. For illuminated Twin Push Button Actuator, only the "Integrated LED illumination module" to be used
for illumination.
5
35
2
36
37
35
Advertisement
