General Operations; Adjusting The Sound Characteristics; Muting The Sound; Setting The Clock - Blaupunkt BOSTON CD189 User Manual

General Operations

Volume Level Control and Memory
Rotate the dial to set the memory for the volume level which
will be recalled when the unit is turned on.
1.
Adjust the volume level. Spinning or fast rotation of the
dial knob will increase the number of turns needed to
reach max. volume.
Volume down
Volume up
2.
Hold the pressed for more than 2 seconds.
PWR
The unit will turn off and the selected max. turn-on
volume level is set in memory.
Note
If the unit is turned off with the volume lower than the memory
setting, the unit will return to the lower setting when turned
back on.

Muting the sound

Press .
MUTE / SENS
" MUTE " apeares on the display window.
To restore the previous volume level, press

Setting the Clock

1.
Turn the ignition key to the ON position.
2.
Press the to turn on the unit.
PWR
3.
Press the DISP to display " CLK ADJ ".
A. Press the within 3 seconds to flash the " 12 "
MUTE / SENS
(HOUR ADJ).
B. Rotate the dial to set the hour digit.
C. Press the to flash the " 00 " (MIN ADJ).
MUTE / SENS
D. Rotate the dial to set the minute digit.
4.
Press the
DISP
5.
Rotate the dial to select the 12 or 24-hour time mode.
Each time you rotate the dial, the mode changes or
toggles as follows;
Ô Ô
CLOCK 12 Ô Ô Ô CLOCK 24
6.
Press the
DISP
Ignition-off Clock Recall
The display will illuminate showing the time and then auto-
matically shut off after 5 seconds.
Press the while the ignition switch is in the " OFF " posi-
DISP
tion.
Mode Selector
Each time the
DISP
over as shown below;
Priority STN CALL
CLOCK 12
again.
MUTE / SENS
Display priority setting
Display Priority can be set for the following items;
Radio mode
• Frequency and Station Name, plus during
CDC(CD changer) mode (HOUSTON DM189 only)
• Track No, Track time and Disc name.
Example
To set Station Name to the Display Priority.
1.
Press the
DISP
appears in the display window.
2.
Hold the
DISP
to display " CLOCK 12 ".
momentarily. The clock is activated.
is pressed, the display window will change
LEVEL 1 Temporary ( NO NAME )
CLK ADJ METER 1
three times, and the temporary display
pressed for more than 2 seconds.
E-3
" NO NAME" or any station name blinks once to indicate
that Station Name is selected for the Display Priority.
After 5 seconds, the display mode will automatically re-
turn to the Display Priority showing either "NO NAME" or
the station name.
Tip
Frequency Display is initially set as the Display Priority,
and Station Name ("NO NAME") is set to "Temporary".

Adjusting the Sound Characteristics

1.
Press the to select the desired adjustment mode.
AUD
BASS 0 TREBLE 0 LOUD OFF(LOUDNESS)
R0 F0(FADER) L0 R0(BALANCE)
2.
Rotate the dial to adjust the selected item.
Adjust within 3 seconds after selecting the item.
After 3 seconds, the dial functions as volume control.
Use the following tables as a guide for adjusting the set-
tings in each mode.
BASS BASS -5
TREBLE TREBLE -5
LOUD LOUD OFF
BALANCE L9 R0(Full left)
FADER R9 F0(Full rear)
BASS +5
TREBLE +5
LOUD ON
L0 R9(Full right)
R0 F9(Full front)