Installing The Mini Pcie Module - DFI GHF51 User Manual

I/O Connectors Expansion Slots
X X

Installing the Mini PCIe Module

Before installing the Mini PCIe module into the Mini PCIe socket, please make sure that the fol-
lowing safety cautions are well-attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
3. Locate the Mini PCIe socket on the system board
4. Make sure the notch on card is aligned to the key on the socket.
Mini PCIe Full Size
Notch
User's Manual | GHF51
Mini PCIe Socket
Stand-off
Key
Please follow the steps below to install the card into the socket.
Chapter 2
HARDWARE INSTALLATION
Step 1:
Insert the card into the socket at an
angle while making sure the notch
and key are perfectly aligned.
Step 2:
Press the end of the card far from
the socket down until against the
stand-off.
Step 3:
Screw tight the card onto the stand-
off with a screw driver and a stand-
off screw until the gap between
the card and the stand-off closes
up. The card should be lying paral-
lel to the board when it's correctly
mounted.
14