Advertisement
This document provides installation and setup instructions for the IBM System
Storage EXN2000 storage expansion unit. Additional information about the
TM
EXN2000 can be found in the
Unit Hardware and Service Guide
Note:
This document presents the EXN2000 information previously found in the
IBM System Storage EXN1000 and EXN2000 Installation and Setup Instructions
GC26-7786.
Read the safety notices:
Before continuing, make sure that you have reviewed the safety notices in the
documentation that came with this system. Do not plug any cables into the
system, adapters, or any electrical outlets until you have reviewed the safety
information and followed the procedures in this document.
Need help?
If you encounter any difficulties while setting up your system, contact IBM service
and support for assistance. Information can also be found at the following Web
site:
www.ibm.com/storage/support/nas/
Customer-supplied items needed for setup:
!
#2 Phillips screwdriver
!
ESD wrist strap
!
Pointed tool for setting ID switches
!
7mm nut driver
IBM System Storage EXN2000 Storage Expansion
.
r
,
1
Advertisement
