Tuner; Storing Preset Stations - Philips FWP78P37 User Manual

20
MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz
STANDBY
ON
CLOCK/
TIMER C D 1 • 2 • 3
CD
PROG
SEARCH • TUNING
DIGITAL SOUND
CONTROL
Note:
– For 'EASY SET' feature, please refer to
page 15.
Tuning to radio stations
1 Press TUNER (FM•AM) to select
TUNER mode.
™ "TUNER" will be displayed.
A few seconds later, the current
radio frequency will be displayed.
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the
desired radio station is reached.
pg 01-28/P78/37-Eng2
C
STEREO
BACK
FRONT HSD
L R
250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
PRO LOGIC
DOLBY B
S S
NR
RDS
NEWS!
FM • AM TAPE 1 • 2 CDR / VIDEO

TUNER

TAPE AUX
SIDE A•B PRESET A.REV
STOP • CLEAR PLAY PAUSE PREV SIDE NEXT
SOUND NAVIGATION
VOLUME
DYNAMIC BASS
BOOST
• To tune to a weak radio station,
briefly press à or á repeatedly
until the display shows the desired
frequency and/or when the best
reception has been obtained.

Storing Preset Stations

You can store up to 40 radio stations in
the memory. When a preset radio
station is selected, the preset number
appears next to the frequency on the
display.
Automatic programming
1 Press TUNER (FM•AM).
2 Press PROG for more than one
second.
™ The starts flashing and
PROGRAM
"AUTO" will be displayed.
20
TUNER
™ The system will search for every
available radio station in the FM
waveband first, then search the
AM waveband.
™ All available radio stations will be
stored automatically. The
frequency and preset number will
be displayed briefly.
™ The system will stop searching
when all the available radio
stations are stored or when the
memory for 40 preset radio
stations is used.
™ The system will remain tuned to
the last stored preset radio
station.
Notes:
– You can cancel the automatic
programming by pressing PROG or Ç
(on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10
before starting automatic programming,
only the preset numbers 10 to 40 will
be programmed.
Manual programming
1 Press TUNER (FM•AM).
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press PROG for less than one
second.
™ The starts flashing.
PROGRAM
12/20/99, 2:23 PM
™ The next available preset number
will be displayed for selection.
4 Press à or á to tune to the
desired frequency.
• If you wish to store the radio station
to another preset number, press 4
or 3 to select the desired preset
number.
5 Press PROG again.
™ The
disappears and the
PROGRAM
radio station will be stored.
• Repeat steps 3 – 5 to store other
preset radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show "FULL".
If you want to change an existing
preset number, repeat steps 3 – 5.
– You can cancel manual programming
by pressing Ç (on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press 4 or 3 to select the desired
preset number.
™ The preset number, radio
frequency, and waveband appear
on the display.
3139 116 19452 (ENG)