Features of your vehicle
How to reset the power sliding door
and power tailgate
OYPI049020
If the battery has been discharged
or disconnected, the related fuse
has been replaced or disconnected,
and the power sliding door or power
tailgate doesn't work properly, the
power sliding door and power tail -
gate must be reset as follows:
For power sliding door
1. Put the shift lever in the P (Park).
2. Close the fuel filler lid.
3. Change the position of fuse
switch to OFF on the driver's side
fuse panel and change the posi -
tion of fuse switch to ON after 1
minute.
4. Close the sliding door manually.
5. Open the sliding door completely
using the transmitter or main
control button on the overhead
console.
6. Close the sliding door completely
using the transmitter or main
control button on the overhead
console.
4
32
Power sliding door and power tailgate
For the left/right power sliding
doors and power tailgate, follow
above steps to reset.
If the power sliding door or power
tailgate doesn't work properly after
the above procedure, have the sys -
tem checked by a professional
workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.
For power tailgate
1. Put the shift lever in P (Park).
2. Press the tailgate handle switch
and tailgate close button at the
same time for more than 3 sec -
onds. (the chime will sound).
3. Close the tailgate manually.
4. Open the tailgate using the tail -
gate handle switch and allow it to
fully open.
5. After fully opening, the tailgate
will complete initialisation and
hazard warning flasher lights will
flash twice indicating reset com -
plete.
If the power tailgate does not work
properly after the above procedure,
have the system checked by a pro -
fessional workshop. Kia recom -
mends to visit an authorised Kia
dealer/service partner.
Need help?
Do you have a question about the CARNIVAL and is the answer not in the manual?