Table of Contents
Advertisement
Disc Operations
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
changer mechanism.
– Do not load more than one disc onto
each tray.
Playable discs
This system is able to play:
– All pre-recorded audio CDs
– All finalised audio CDR and audio CDRW
discs
– MP3-CDs (CD-ROMs with MP3 tracks)
Loading discs
1
Press OPEN•CLOSE 0 on the main unit to
open the disc trays.
2
Load a disc with the label side facing up.
3
Press OPEN•CLOSE 0 again to close the disc
tray.
"READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
Note:
– To ensure good system performance, wait until
the disc trays completely read the disc(s) before
proceeding.
18
(page 3 - P4)
Basic playback controls
Load discs
(page 3 - P4)
To play all discs on the disc trays
Press É Å .
OR
In the stop mode, press CD to select a disc tray
to begin, then press É Å .
All the available discs will play once, then stop.
To play the selected disc only
Press one of the CD 1~3 buttons on remote
control.
The selected disc will play once, then stop.
To select a desired track
Press – or + (or í/ë on the remote control)
repeatedly until the desired track is displayed.
During random play (shuffle), pressing – (or
í on the remote control) will not affect the
current playback.
To search for a particular passage during
playback
Press and hold 4 or ¢ (or 1 / ¡ on
the remote control) and release it when the
desired passage is located.
During searching, the volume will be reduced.
For a MP3 disc, the volume will be muted.
To change discs without interrupting
playback
Press DISC CHANGE.
For example, if currently disc tray 1 is playing,
you can change the discs on disc trays 2 and 3.
To interrupt playback
Press É Å .
To resume normal playback, repeat the
above.
To stop playback
Press Ç.
If the system remains in the stop mode for 30
minutes, it will switch to the standby mode.
Advertisement
Table of Contents
